<!-- source: https://www.photorobot.com/manuals/c1300-light-setup | Generated 2026-11-18 from structured site content; language: en. -->

# PhotoRobot C1300 Light Setup Manual

> Lights for the C1300 turntable: product softboxes on LS-13B, background top and bottom lights and the fifth light added with the Robotic Arm.

# PhotoRobot C1300 - Light Setup

This manual shows which studio lights the C1300 turntable uses and how to angle them: four lights for the turntable
alone, five lights when the turntable works with the Robotic Arm. Assembly of the machine itself is described in the
[C850 & C1300 User Guide](https://www.photorobot.com/manuals/c850-c1300-user-guide).

## 1 The Four Lights at a Glance

| # | Light | Modifier | Stand | Position and angle |
| --- | --- | --- | --- | --- |
| 1 | **Product left light** | softbox 60 x 85 cm, vertical | **LS-13B** | front left; softbox tilted about 45 deg |
| 2 | **Background top light** | softbox 90 x 120 cm, horizontal | **LS-13B** | behind the background; shines directly onto the background, softbox at 0 deg |
| 3 | **Background bottom light** | softbox 90 x 120 cm, horizontal | **LS-3B** | below the background; tilted about 45 deg |
| 4 | **Product right light** | softbox 60 x 85 cm, vertical | **LS-13B** | as light 1, mirrored |

## 2 Positions and Distances on the C1300

The C1300 is larger than the C850, so its light distances are individual and must not be copied from the
[C850 Light Setup](https://www.photorobot.com/manuals/c850-light-setup). The source documentation for the C1300 does not specify light
positions, distances or heights yet. They are set on site during the installation of your machine.

## 3 Background Lights (2 and 3)

1. Mount the **background top light** with the **90 x 120 cm softbox in a horizontal position** on an **LS-13B**
   stand. It shines **directly onto the background** (softbox at 0 deg).
2. Mount the **background bottom light** with the **90 x 120 cm softbox in a horizontal position** on an **LS-3B**
   stand and place it **below the background**, tilted about **45 deg**.

## 4 Product Lights (1 and 4)

1. The left and right lights have **60 x 85 cm softboxes in a vertical position**.
2. Mount them on **LS-13B** stands, front left and front right.
3. Tilt each softbox about **45 deg**.

## 5 With the Robotic Arm: Five Lights

With the Robotic Arm the background lights (2, 3) and the product lights (1, 4) stay as above. A fifth light is added:

| # | Light | Modifier | Stand | Position and angle |
| --- | --- | --- | --- | --- |
| 5 | **Lower front light** | softbox 40 x 120 cm, horizontal | **LS-3B** | in the front section, below the background; tilted about 45 deg |

Mount the lower front light with the **40 x 120 cm softbox in a horizontal position** on an **LS-3B** stand, in the
**front section below the background**, tilted about **45 deg**.

## 6 Light Control

Light control: [Broncolor Lights Management](https://www.photorobot.com/manuals/photorobot-broncolor-lights-management) or the FOMEI manuals,
depending on the light set.

