<!-- source: https://www.photorobot.com/manuals/c850-light-setup | Generated 2026-11-18 from structured site content; language: en. -->

# PhotoRobot C850 Light Setup Manual

> Light plan for the C850 turntable: product softboxes on LS-13B, background top and bottom lights, positions in mm and the fifth light with the Robotic Arm.

# PhotoRobot C850 - Light Setup

This manual shows where the studio lights of the C850 turntable go and how to angle them: four lights for the
turntable alone, five lights when the turntable works with the Robotic Arm. Assembly of the machine itself is
described in the [C850 & C1300 User Guide](https://www.photorobot.com/manuals/c850-c1300-user-guide). The C1300 is larger and has its own
light distances: see the [C1300 Light Setup](https://www.photorobot.com/manuals/c1300-light-setup).

## 1 The Four Lights at a Glance

| # | Light | Modifier | Stand | Position and angle |
| --- | --- | --- | --- | --- |
| 1 | **Product left light** | softbox 60 x 85 cm, vertical | **LS-13B** | front left; softbox tilted about 45 deg |
| 2 | **Background top light** | softbox 90 x 120 cm, horizontal | **LS-13B** | behind the background; shines directly onto the background, softbox at 0 deg |
| 3 | **Background bottom light** | softbox 90 x 120 cm, horizontal | **LS-3B** | below the background; tilted about 45 deg |
| 4 | **Product right light** | softbox 60 x 85 cm, vertical | **LS-13B** | as light 1, mirrored |

## 2 Positions on the C850

Positions in mm, measured from the C850 production drawing (approximate, about ±100 mm). X runs from the center axis
(+ to the right), Y from the plate center (+ toward the camera). Light heights are not specified in the source: set
them on site.

| # | Light | X | Y | Height | Aim / tilt |
| --- | --- | --- | --- | --- | --- |
| 1 | Product left | ≈ −700 | ≈ +750 | set on site | tilt 45 deg |
| 2 | Background top | 0 | ≈ −1 150 | set on site | 0 deg |
| 3 | Background bottom | 0 | ≈ −600 | set on site | tilt 45 deg to the background |
| 4 | Product right | ≈ +700 | ≈ +750 | set on site | tilt 45 deg |
| 5 | Lower front (with the Robotic Arm) | 0 | ≈ +560 | set on site | tilt 45 deg |
| BG | Built-in background | – | ≈ −470 | – | lit from behind and below |

## 3 Background Lights (2 and 3)

1. Mount the **background top light** with the **90 x 120 cm softbox in a horizontal position** on an **LS-13B**
   stand. It shines **directly onto the background** (softbox at 0 deg).
2. Mount the **background bottom light** with the **90 x 120 cm softbox in a horizontal position** on an **LS-3B**
   stand and place it **below the background**, tilted about **45 deg**.

## 4 Product Lights (1 and 4)

1. The left and right lights have **60 x 85 cm softboxes in a vertical position**.
2. Mount them on **LS-13B** stands, front left and front right.
3. Tilt each softbox about **45 deg**.

## 5 With the Robotic Arm: Five Lights

With the Robotic Arm the background lights (2, 3) and the product lights (1, 4) stay as above. A fifth light is added:

| # | Light | Modifier | Stand | Position and angle |
| --- | --- | --- | --- | --- |
| 5 | **Lower front light** | softbox 40 x 120 cm, horizontal | **LS-3B** | in the front section, below the background; tilted about 45 deg |

Mount the lower front light with the **40 x 120 cm softbox in a horizontal position** on an **LS-3B** stand, in the
**front section below the background**, tilted about **45 deg**.

## 6 Light Control

Light control: [Broncolor Lights Management](https://www.photorobot.com/manuals/photorobot-broncolor-lights-management) or the FOMEI manuals,
depending on the light set.

