# PhotoRobot Carpet Studio with Carousel - User Guide The PhotoRobot Carpet Studio User Guide provides detailed information and instructions for the functional operation of the system. ## PhotoRobot Carpet Studio User Guide This user guide details the PhotoRobot Carpet Studio with Carousel 3000. It provides detailed information and instructions for the functional installation & operation of the Carpet Studio by the customer. There are overviews of the Carousel 3000 robot, PhotoRobot Controls App software, camera positioning, operation, and the information labels. **Important:** Always refer to [PhotoRobot Safety Information & Instructions](https://www.photorobot.com/manuals/safety-information) along with any documentation provided specifically for your device. Further, the initial installation of the PhotoRobot Carpet Studio and any PhotoRobot device in general must be carried out by an authorized PhotoRobot authority. These include an approved distributor, or a representative of the manufacturer itself. **Note:** For more information specifically on the Carousel 3000 robot, refer to the [PhotoRobot Carousel User Guide](https://www.photorobot.com/manuals/carousel). ## Welcome to PhotoRobot Carpet Studio Thank you for your purchase of the PhotoRobot Carpet Studio, and congratulations! PhotoRobot carries decades of professional experience, insight, and innovation in automated photography. Both stylish and ingenious, each product boasts a design that prioritizes the customer and maximum photo studio productivity. This means you can always expect the highest levels of accuracy, speed, and photo standardization with every use – in every one of your workflows. Welcome to your PhotoRobot Carpet Studio. ## 1. Product Description - PhotoRobot Carpet Studio The PhotoRobot-powered Carpet Studio integrates the Carousel 3000 as a robotic photography platform with software controls via PhotoRobot Controls App (further “CAPP”). The robotic platform of the Carousel 3000 is suitable for the spin orientation of photographed objects, while the rotary platform is 3 meters in diameter. Meanwhile, the engine is separate from the photography platform, guaranteeing a low floor level. ### 1.1. Machine Overview - Carousel 3000 The main part of the Carpet Studio is the PhotoRobot Carousel 3000 machine in the square-shape modification with drive-up ramps on the front, left, and right sides. ### 1.2. Main Machine Components of Carousel 3000 The main components of the Carousel 3000 are in the following infographics labeling parts 1 - 7. - Rotary platform **(1)** - Plate floor **(2)** - Motor assembly **(3)** - Machine connectors dome **(4)** - Drive-up ramps **(5)** - Background / cyclorama connecting points **(6)** - 19-inch rack Control Unit **(7)** **Note:** The 19-inch rack **(7)** houses the Control unit, which is installed horizontally in a ventilated space to ensure the cooling of electronic components. ## 2. Controls Software Overview - PhotoRobot Controls App Control of the Carousel 3000 robotic photography platform and workstation is via PhotoRobot Controls App software (CAPP). CAPP integrates control over robots, cameras, studio lights, and post production. This includes workflow management features as well as the necessary functionality for effective automation in post-processing, and publishing of content. **Note:** PhotoRobot Controls App software is not delivered with the device; it is a separate purchase available for download via your [PhotoRobot Account](https://account.photorobot.com/downloads). For support with installation and getting started, refer to [PhotoRobot Controls App: Getting Started](https://www.photorobot.com/manuals/getting-started). Further, be aware that the software may start up in “wizard mode” after installation of CAPP. Wizard mode is a simplified user interface which enables the scanning of barcodes to identify objects and automatically start capture sequences. For technical information on the configuration of wizard mode, refer to [PhotoRobot Controls App Wizard Mode Configuration](https://www.photorobot.com/manuals/wizard-mode). ## 3. Carousel 3000 Machine Dimensions The following technical blueprints illustrate the machine dimensions of the Carousel 3000 in the square-shape configuration. ## 4. Cameras Positioning Camera positioning for the PhotoRobot Carpet Studio is as illustrated in the following infographic. - Cameras 1 through 4 are installed along the sides of the platform. - Cameras 5 and 6 are installed in the top structure. - Camera 7 (Canon EOS R6, not pictured above) is installed into the top structure into the socket on the end of the optical USB extension, hanging left or right from the top structure. ## 5. Operation Instructions ### 5.1. Switching ON the Carpet Studio **5.1.1.** To power the Carpet Studio workstation, begin by switching on the main power breaker. **5.1.2.** Next, switch on the Control Unit. **5.1.3.** Power on the SynchroBox. **5.1.4.** Switch on the LaserBox. **5.1.5**. Switch on the workstation computer. **5.1.6.** Launch PhotoRobot Controls App software on the computer, and go to Settings, followed by Workspaces, and select your workspace. **5.1.7.** After selecting a workspace in CAPP, switch on button number 1 on the USB hub, and wait until the Camera 1 light changes to green. **5.1.8.** Switch on button number 2 on the USB hub, and wait until the Camera 2 light is green. **5.1.9.** Repeat the process for button number 3, button number 4, and button number 5 on the USB hub. Remember to wait for the corresponding camera light to change to green before switching on the next number. **5.1.10.** Plug the Camera 6 (Canon EOS 5 DSR) USB connector into the socket at the end of the optical USB extension, and wait until the Camera 6 light is green. **5.1.11.** After Camera 1 - 6 is connected, start test shooting. **5.1.12.** Buttons number 6 and 7 on the USB hub correspond to Camera 7. Connect Camera 7 to either button 6 or button 7 depending on the position of the camera. This will depend on whether it is physically mounted to the left or to the right. Note that both buttons 6 and 7 on the USB hub can stay on continuously without causing any harm. Further, Camera 7 is a hand-operated camera, and it should be connected via the optical USB extension. The camera then powers on using its own on and off button, not the USB hub – and you should only power it on when actively using it. **5.1.13.** Start test shooting with Camera 7, and then power off Camera 7 after it is ready for use. ### 5.2. Switching OFF the Carpet Studio **5.2.1.** To switch OFF the Carpet Studio, begin by powering off Camera 7 using the power button on the camera body. **5.2.2.** Next, unplug the Camera 6 (Canon EOS 5 DSR) USB connector from the socket on the end of the optical USB extension. **5.2.3.** In order, switch OFF buttons number 5 followed by 4, then 3, 2, and 1 on the USB hub. **5.2.4.** Quit PhotoRobot Controls App software on the workstation computer. **5.2.5.** Shut down the workstation computer. **5.2.6.** Power off LaserBox. **5.2.7.** Switch off the SynchroBox. **5.2.8.** Power off the Control Unit. **5.2.9.** Switch off the main power breaker. **Note:** If encountering issues during machine operation, please submit a support ticket via [https://support.photorobot.com](https://support.photorobot.com). ## PhotoRobot Viewer: Carpet & Flooring Visualizer Developed with Jakub Klaus of Breno Carpets, the [Carpet & Flooring Visualizer](https://hosting.photorobot.com/demo/carpet-viewer) is a custom [PhotoRobot Product Viewer](https://www.photorobot.com/software/360-product-viewer) solution. It enables the digital presentation of carpets and rugs in a virtual space. Viewers can swap between different designs & colors, and position products around the room on different places of the floor. There is thumbnail navigation to change the interior view, with buttons to switch between products or load a 360 spin. The viewer also enables the configuration of the flooring allowing consumers to mix and match items with different interior designs. ## 6. Information Labels ### 6.1. Symbols Overview ### 6.2. Carousel 3000 Information Labels ## 7. Maintenance and Review The PhotoRobot Carpet Studio must be inspected 1 x per year by authorized personnel as follows: - Rotary platform drive inspection - Gear chain re-tensioning and review (including cog-wheels) - Main platform gear inspection - Indexing belt inspection (if included) - Inspection of the machine floor and its support - Motor drive cover safety switch function test - Firmware updates (paid or free, depending on the support contract)