<!-- source: https://www.photorobot.com/manuals/cube-mannequin-light-setup | Generated 2026-11-18 from structured site content; language: en. -->

# PhotoRobot CUBE with Mannequin Light Setup Manual

> Floor plan of a mannequin station with a PhotoRobot CUBE and six lights on a pole structure: background, pole and light distances in mm and the camera position.

# PhotoRobot CUBE with Mannequin - Light Setup

This manual gives the floor plan of a mannequin station with a PhotoRobot CUBE and six lights on a pole structure.
All dimensions are in millimeters. Using the CUBE itself is described in the
[Cube V5 / V6 / Compact Guide](https://www.photorobot.com/manuals/cube-v5-v6-compact).

## 1 The Six Lights at a Glance

| # | Light | Modifier | Mounted on | Position |
| --- | --- | --- | --- | --- |
| 1 | **Product top light** | octabox | - | in front of the CUBE, on the center axis |
| 2 | **Product left light** | softbox 140 x 200 cm, vertical | pole C | 1,450 mm left of the center axis |
| 3 | **Background left light** | strip softbox 30 x 180 cm | pole A | 200 mm in from the background edge, 600 mm from the background |
| 4 | **Background right light** | strip softbox 30 x 180 cm | pole A | as light 3, mirrored |
| 5 | **Product right light** | softbox 140 x 200 cm, vertical | pole C | 1,450 mm right of the center axis |
| 6 | **Product bottom light** | softbox 40 x 120 cm | **LS-3B** | in front of the CUBE, on the center axis, toward the camera |

![CUBE mannequin floor plan: Cube 1 000 mm from background, product lights on pole C 1 450 mm off axis, camera at 3 740 mm, six lights.](https://cdn.photorobot.io/manuals/v1/schematics/cube-mannequin-6-light-setup-01-floor-plan-1673e1.svg)

01 Product top · 02 Product left · 03 Background left · 04 Background right · 05 Product right · 06 Product bottom

## 2 Background and Center Axis

| Dimension | Value |
| --- | --- |
| Total background width | 2,720 mm |
| Center of the background (X axis) from either edge | 1,360 mm |
| CUBE center from the middle of the background (Y axis) | 1,000 mm |

## 3 Poles (Structure)

- Supporting poles of **3,000 mm** and poles for the lighting.
- Spacing of the supporting poles: **2,250 mm**, or according to the location and the ceiling.
- Pole C is **2,400 mm** from the background.
- Distance between the CUBE and pole C: **1,400 mm** to the center axis.

## 4 Background Lights (3 and 4)

| Dimension | Value |
| --- | --- |
| Position of each background light | 200 mm from the background edge, 600 mm from the background |
| Spacing between the two background lights | 2,320 mm |

## 5 Main Product Lights (2 and 5) on Pole C

| Dimension | Value |
| --- | --- |
| Spacing between the left and the right light | 2,900 mm |
| Each light from the center axis | 1,450 mm |
| Pole C from the background | 2,400 mm |

## 6 Camera

Camera distance from the background: **3,740 mm**.

## 7 Light Control

Light control: [Broncolor Lights Management](https://www.photorobot.com/manuals/photorobot-broncolor-lights-management) or the FOMEI manuals,
depending on the light set.

