# FOMEI LED DMX 150B Studio Light - PhotoRobot User Guide The following user manual provides an overview and instructions for operation of the FOMEI LED DMX 150B studio light with PhotoRobot. ## FOMEI LED DMX 150B Studio Light - PhotoRobot User Guide The following user manual provides an overview and instructions for operation of the FOMEI LED DMX 150B studio light with PhotoRobot. This information aims to support PhotoRobot customers in the initial setup and first use of their FOMEI LED DMX 150B series studio light. **Note:** This user manual is a reproduction of the official FOMEI LED DMX 150B documentation by the manufacturer. Refer to the [FOMEI Lights & Photography Website](https://www.fomei.com/en) for official documentation, and also read any documentation provided specifically for your device before first use. **Important:** Before operation, ensure that the product is intact and that there are no missing parts. Do not open or repair the unit yourself. If there is any defect, please contact FOMEI directly. For warranty and maintenance information of FOMEI products, refer to the documentation provided specifically for your device. ## About: LED DMX 150B Studio Light by FOMEI The LED DMX 150B series studio light is a new continuous with a COB LED chip. Thanks to the Bowens mount, it is possible to attach various accessories to the device. The light itself offers a maximum power of 150W, and a color temperature of 5600K. It offers nine different film effects, and light control via Bluetooth or DMX protocol. ## Product Overview Refer to the following infographics showing the main parts and controls of the LED DMX 150B light. The main components include: - Reflector - Mount Lock - LED Light Bulb - Handle - Tilt - U-bracket The rear of the device has the user controls, control interface, and power socket: - Power Switch - Display - Menu Button - Up & Down - DMX In & Out - Socket ## CCT Mode After turning on the light, the display will show the welcome screen with the CCT (Correlated Color Temperature) settings. Press the ENTER button one time to select the parameter, and then press the Up & Down buttons to adjust settings. ## Scene Mode Press the MENU button to change the scene mode settings. Then, press ENTER to select the parameter (effect / speed / intensity), and use the Up & Down buttons to adjust settings. ## DMX Settings To adjust the DMX settings, use the ENTER button to select the parameter (channel / fan), and the Up & Down buttons to make changes. Note: If the fan is turned OFF, the maximum intensity is limited to 50%. ## BT Reset To adjust the BT Reset settings, press the MENU button followed by ENTER, and select the question mark (“?”). Next, press the Down button to select the option “YES”. When the option “YES” disappears, the connection has been reset. ## FOMEI LED DMX 150B Specifications The specifications of the FOMEI LED DMX 150B studio light are shown in the following table. | Specifications | | --- | | LEDS | 1x COB LED chip | | Wattage | 150W | | CCT | 5600K | | Dimming | 0 - 100% | | Beam Angle | 30° | | CRI | 96 | | LUX | 5600K: 0.5m 109000 / 1m 18400 / 2m 4280 / 3m 1900 | | Voltage | AC 220 - 240V | | Dimensions | 420 x 185 x 140mm | | Weight | 2.1kg | ## Wireless Control App Wireless control of the FOMEI LED DMX 150B studio light is via the DESAL Light + app for either iOS or Android. Use the QR code below for to find downloads for iOS or Android, or search the Apple Store App store for “DESAL Light +” to download on iOS. ## Information Labels Note that the information label with the cross-out bin means that within the European Union, the product: - Must be collected separately in accordance with applicable electronic waste regulations at its end-of-life. - This applies to the device and to all accessories marked with this symbol. - Do not dispose of these products as unsorted municipal waste. ## Final Notes Refer to the manufacturer’s website [fomei.com](https://fomei.com/en) for the official FOMEI LED DMX 150B User Manual and downloadable PDF version of this document.