# FOMEI LED ROLL - PhotoRobot User and Controls Guide This user manual provides an overview and instructions for the operation of the LED light FOMEI ROLL with PhotoRobot systems. ## FOMEI LED ROLL - PhotoRobot User and Controls Guide The following user manual provides an overview and instructions for the operation of the LED light FOMEI ROLL with PhotoRobot systems. This information aims to support PhotoRobot customers in their initial understanding and first use of FOMEI LED ROLL products. Find documentation on the **LED ROLL 62 DMX**, **LED ROLL 100 DMX**, **LED ROLL 250 DMX**, and **LED ROLL RGB 100 DMX**. **Note:** This user manual is a reproduction of official documentation by the manufacturer for FOMEI products. Refer to the manufacturer’s website [fomei.com](https://www.fomei.com/en) for the official documentation on your specific device. Additionally, be sure to read any instruction manual provided specifically with your device before its first use. **Important:** Ensure that the product is intact and that there are no missing parts before use. Do not open or repair the unit yourself. If there is any defect, please contact FOMEI directly. For warranty and maintenance information of FOMEI products, refer to the documentation provided specifically for your device. ## Before First Use - Warnings & Safety Information **Before first use, note the following general warnings from the manufacturer:** 1. Ensure that the product is intact and that there are no missing parts. 2. In case of damage, contact a professional service representative of FOMEI. 3. When using the product, ensure the environment is dry and ventilated. 4. For optimal performance, regularly clean the product using a clean cloth. 5. Do not scratch or apply pressure to the product. **Additionally, ensure to adhere to the manufacturer’s safety warnings:** 1. Do not use your LED unit in an environment where moisture is likely to come in contact with the unit. 2. Do not disassemble the product. In case of damage, contact a FOMEI service representative, or contractual service of trained professionals. 3. If the product is disassembled, it will not be covered under warranty. 4. Do not use the product in extreme temperatures (+50° C) 5. The product is not suitable for children. 6. Do not plug / unplug the device when the power is still connected. 7. Do not burden light more than necessary. 8. Do not restrict air vents while in use. 9. Note that a fire hazard exists if flammable materials are placed in close proximity when the unit is in use. 10. Avoid placing cables where they can be hazardous. 11. Keep out of reach of children. **Regarding recycling and information labels, be aware this product contains electronic parts and labels for its appropriate recycling.** Do not dispose of the product with general waste, and instead take it to an electronic recycling facility. Please, protect our planet. The information label with the **crossed-out bin** means that within the European Union, the product: - Must be collected separately in accordance with applicable electronic waste regulations at its end-of-life. - This applies to the device and to all accessories marked with this symbol. - Do not dispose of these products as unsorted municipal waste. ## PhotoRobot - FOMEI LED ROLL User Guide The contents of this user guide to using PhotoRobot with FOMEI LED ROLL products cover the following products by FOMEI. - **LED ROLL 62 DMX** (FY3606) - **LED ROLL 100 DMX** (FY3607) - **LED ROLL 250 DMX** (FY3608) - **LED ROLL RGB 100 DMX** (FY3609) ## 1. About FOMEI LED ROLL Products FOMEI LED ROLL products are flexible continuous lights which function as an excellent alternative to classic board lights thanks to their versatility. The panel is able to bend and adapt to the scene, or function as a classic board light on a stand with X-frame. At the same time, Velcro on the back of the panel and additional Velcro strips are usable for positioning, joining more panels together, or attaching to various surfaces. It is possible to power the light on from the AC power supply or battery. Meanwhile, the lightweight and separate control unit allows for easy use outdoors, mounted on tall light stands, or in less accessible spaces in general. Finally, the LED ROLL winds around a rigid cardboard tube. We recommend using this tube for storage and transport to maintain durability and protection of the panel. ## 2. On-Stand Usage For on-stand usage, the FOMEI LED ROLL has holes in each corner on the back side of the device for inserting the X-frame. The X-frame must be stretched crosswise, with each end inserting into the corners on the back side of the LED ROLL panel. In the package, there is also a positioning joint, which attaches to the cross holder (to its center). It is then possible to attach the other end to the spigot (the reduction at the top of a studio stand) of a common studio stand. This allows for unrolling of the light into a flat-shape LED panel to position as necessary. ## 3. Off-Stand Usage To use the ROMEI LED ROLL without a stand, the flexible panels outside of the stand are both flexible and light weight. This allows for positioning the panel on the stage and making a wide range of shapes. It is possible for an assistant to hold the LED ROLL, or to fasten it in place with the Velcro along the entire edge of the back side of the panel. In this way, it is possible to attach several panels to each other to increase the area of the light source. ## 4. Softbox Usage The softbox for the FOMEI LED ROLL consists of a folding frame, a diffuser, and a honeycomb filter. Using the Velcro strips, it is possible to unfold the frame and attach its outer edge to the front of the LED light. The Velcro around the outer edges must fold over the back of the light, and attach to the edge. Also, the frame stretches to stretch the diffusion fabric into it, which then attaches to the inner edges by Velcro. This allows the softbox to create a more homogeneous spread of light. Then, tightening the honeycomb filter also serves to direct the light and limit its flow where necessary. ## 5. FOMEI LED ROLL Control Units ### LED ROLL 62 DMX / LED ROLL 100 DMX Control Unit 1. Display 2. Display Touch Control (Power Output, DMX Channel) 3. Rotary Dial for Power Output Setting / Power Saving Mode (Press) 4. Connecting Cable for Powering the LED ROLL Panel 5. Connector for Powering the Unit 6. V-Mount Battery Connection 7. Steel Cable for Hanging the Control Unit 8. DMX Connectors RJ45 – Input / Output 9. Label with Description of Individual Pins on DMX ### LED ROLL 250 DMX Control Unit 1. Display 2. Buttons to Select Settings – Power, Channel (DMX), Preset Modes 3. Rotary Selector to Change Settings of Each Mode 4. Cable to Connect the Control Unit with LED ROLL Light 5. 2 x V-Mount Plates for Batteries 6. ON / OFF Switch 7. Connector for Power Supply 8. DMX RJ45 – Input / Output 9. Metal Handles ### LED ROLL 100 RGB DMX Control Unit 1. Display 2. Controls (A. Hue; B. Saturation; C. Intensity; D. CCT; E. Power Output, F. Channel, G. Film Scenes) 3. Rotary Selector for Setting Individual Modes 4. Cable for Connecting the Control Unit to LED ROLL Light 5. Connector for Power Supply 6. ON / OFF Switch 7. DMX RJ45 – Input / Output 8. Steel Cable for Hanging of Control Unit 9. Antenna for Receiving Signal from Wireless Controller (Optional) ### RC-1 CONTROLLER FOR LED ROLL 100 DMX 1. Rotary Selector for Setting Individual Modes 2. Buttons to Switch Between Modes and ON / OFF Button 3. Display ### Battery Installation To insert batteries, be sure to insert the batteries completely into the holder. The battery clicks when it locks in place. To remove batteries, press the battery lock on the side of the holder, and then remove the battery. ### Light ON / OFF Always ensure the light is OFF before connecting the battery / power supply. After connecting the battery / AC adapter, then set the switch to ON. To turn the light off again, switch to the OFF position. ## 6. What’s Included in Each Device Package ### FY3606 FOMEI LED ROLL 62 DMX - LED ROLL 62 DMX - Control Unit - Velcro Connection / Handling Strips - Carrying Bag - AC Power Supply - Adjustable X-Frame Holder with Tripod Joint - Batteries Not Included ### FY3607 FOMEI LED ROLL 100 DMX - LED ROLL 100 DMX - Control Unit - Carrying Bag - AC Power Supply ### FY3608 FOMEI LED ROLL 250 DMX - LED ROLL 250 DMX - Control Unit - Shell Transport Bag - AC Power Supply ### FY3609 FOMEI LED ROLL 100 RGB DMX - LED ROLL 100 RGB DMX - Control Unit - Carrying Case of Hardened Plastic - AC Power Supply ## 7. Technical Information ### LED ROLL 62 DMX Specifications | LED ROLL 62 DMX Specifications | | --- | | Power | 62W | | LUX | 0.5m / 6940, 1m / 2470, 2m / 668 | | Color Temperature | 5600K | | Voltage | AC 15V / 5A, DC 14.4V | | Dimensions | 61 x 46 x 0.3cm | | Weight | 0.5kg | | CRI | 95 | | LED Diodes | 504 pcs | ### LED ROLL 100 DMX Specifications | LED ROLL 100 DMX Specifications | | --- | | Power | 100W | | LUX | 0.5m / 7980, 1m / 2960, 2m / 993 | | Color Temperature | 5600K | | Voltage | AC 15V / 7A; DC 14.4V | | Dimensions | 121 x 24 x 0.3cm | | Weight | 0.52kg | | CRI | 95 | | LED Diodes | 504 pcs | ### LED ROLL 250 DMX Specifications | LED ROLL 250 DMX Specifications | | --- | | Power | 250W | | LUX | 0.5m / 15800, 1m / 6040, 2m / 1910 | | Color Temperature | 5600K | | Voltage | AC 24V / 15A; DC 2 x 14.4V | | Dimensions | 121 x 46 x 0.3cm | | Weight | 1.02kg | | CRI | 95 | | LED Diodes | 1176 | ### LED ROLL RGB 100 DMX Specifications | LED ROLL RGB 100 DMX Specifications | | --- | | Power | 100W | | LUX (5600K) | 0.5m / 7013, 1m / 2200, 2m / 607 | | Color Temperature | 2700K – 9999 K | | Voltage | AC 15V / 7A; DC 14.4V | | Dimensions | 61 x 46 x 0.3cm | | Weight | 0.76kg | | CRI | 95 | | LED Diodes | 216 pcs yellow, 216 pcs white, 216 pcs RGB | ## FOMEI Company Information and Contact The company **FOMEI s.r.o.** is registered at the address: Machkova 587, Hradec Kralove 500 11, Czech Republic. E-mail to **sls@fomei.com** for general inquiries, or to **servis@fomei.com** for service requests. Telephone: +420 495 056 505 ## Final Notes This is a reproduction of the official FOMEI LED ROLL manufacturer’s documentation, which is also available in a downloadable PDF version on [fomei.com](https://fomei.com/en). For service information, refer to the documentation provided specifically with your device, or to the FOMEI service department for immediate support.