Gebruik de scherptedieptecalculator om de voorste en achterste scherptegrens, de totale scherptediepte en de hyperfocale afstand te schatten voor elke combinatie van brandpuntsafstand, diafragma, sensorformaat en onderwerpafstand. De calculator is bedoeld voor dagelijkse studio- en productfotografie met full-frame- en Canon APS-C-camera’s, met metrische en imperiale eenheden.
PhotoRobot scherptedieptecalculator
Schat de voorste en achterste scherptegrens, de totale scherptediepte en de hyperfocale afstand.
Instellingen
mm
De schuifregelaar dekt het gangbare studiobereik (16–300 mm). Voor bredere of langere lenzen voert u een willekeurige waarde (4–1200 mm) in het veld hierboven in.
Diafragma f/16
cm
Distance measured from
Measured from the focal-plane mark ⦵ on the camera body, the same reference lens specs use for minimum focus distance. The calculator converts it to the lens-to-subject distance (thin-lens equation), and near/far limits are shown from the sensor mark too. See the diagram.
mm
Only to show the distance from the front of the lens; it does not change the DoF.
Canon RF: 20 mm flange + lens length from the spec sheet (EF:
44 mm). Zoom lenses get longer as you zoom.
Resultaten
Totale scherptediepte
34 cm
Near86 cm
Focus100 cm
Far120 cm
Camera126 cm
Near limit86 cm
Far limit120 cm
In front of subject14 cm
Behind subject20 cm
Hyperfocal distance531 cm
Lens to subject (used in formula)95 cm
Front of lens to subject—
Verstrooiingscirkel0,030 mm
Standaard scherptediepte-model met dunne lens: H = f²/(N·c) + f. Waarden kunnen door diffractie, focus breathing en het ontwerp van de individuele lens enigszins afwijken van echte lenzen.
Lens or sensor mark: where do you measure subject distance from?
Sensor mark (S). The ⦵ symbol on the top of the camera body marks the
sensor plane. Lens specifications measure the minimum focus distance from it, and it is
the easiest point to measure from on a PhotoRobot setup with a tape.
Lens (u). Depth of field formulas need the distance from the lens's
optical center to the subject. When you pick Sensor mark, the calculator splits
S into u + v with the thin-lens equation 1/u + 1/v = 1/f:
u = S/2 · (1 + √(1 − 4f/S)). Near and far limits
and the hyperfocal distance are then shown from the sensor mark as well.
The difference matters at product distances: a 105 mm lens at f/16 with the sensor mark
918 mm from the subject gives 4.8 cm of depth of field. Entering the same 918 mm as a
distance from the lens would show 6.5 cm, about a third too much.
The conversion assumes a thin lens. Real lenses focus internally and their optical center
is not exactly where the diagram shows it, so treat results close to the minimum focus
distance (macro) as estimates. A thin lens cannot focus closer than 4 × the focal length
from the sensor (1:1). If you measured from the front of the lens, add the sensor mark to
front of lens length to get S.
Wat is de hyperfocale afstand en waarom is die belangrijk voor studiowerk?
De hyperfocale afstand (H) is de kortste afstand waarop een lens kan worden scherpgesteld terwijl objecten op oneindig nog acceptabel scherp blijven. Stelt u exact op H scherp, dan strekt de scherptediepte zich uit van H/2 tot ∞ – de truc die landschapsfotografen gebruiken om zowel de voorgrond als de horizon scherp te houden.
Voor studio- en productfotografie is het vooral een indicator: zolang uw onderwerpafstand veel kleiner is dan H (wat meestal het geval is – H neemt toe met het kwadraat van de brandpuntsafstand en neemt alleen af met het diafragma), blijft de scherptediepte nagenoeg symmetrisch rond het onderwerp. Wanneer de onderwerpafstand H nadert, loopt de verre limiet door tot in het oneindige en toont de calculator ∞.
Praktische tip voor product- en juwelenfotografie: stel scherp op het voorste detail dat scherp moet zijn en gebruik de rijen ‘Near limit’ / ‘Far limit’ hierboven (of de scherptediepte-tabel) om te controleren of de rest van het object binnen de scherptediepte valt.
Bekijk in één oogopslag de totale scherptediepte voor gangbare onderwerpafstanden en diafragma’s, met in elke cel het exacte scherpstelbereik van nabij tot veraf. Een calculator is niet nodig.
Meer informatie over het berekenen van scherptediepte voor PhotoRobot-klanten vindt u in de onderstaande handleidingen. Daar leest u meer over scherptediepte in relatie tot de door PhotoRobot aanbevolen camera’s, over cameraresolutie en over de studioverlichting van PhotoRobot.