Calculator de adâncime de câmp

Folosiți calculatorul de adâncime de câmp pentru a estima limitele de focalizare apropiată și îndepărtată, adâncimea de câmp totală și distanța hiperfocală pentru orice combinație de distanță focală, diafragmă, format de senzor și distanță până la subiect. Calculatorul este destinat fotografiei de studio și de produs de zi cu zi, cu aparate foto full-frame și Canon APS-C, și acceptă unități metrice și imperiale.

Calculator de adâncime de câmp PhotoRobot

Estimați limitele de focalizare apropiată și îndepărtată, adâncimea de câmp totală și distanța hiperfocală.

Setări

mm

Cursorul acoperă intervalul tipic pentru studio (16–300 mm). Pentru obiective mai largi sau cu distanță focală mai mare, introduceți orice valoare (4–1200 mm) în câmpul de mai sus.

Diafragmă f/16
cm
Distance measured from

Measured from the focal-plane mark ⦵ on the camera body, the same reference lens specs use for minimum focus distance. The calculator converts it to the lens-to-subject distance (thin-lens equation), and near/far limits are shown from the sensor mark too. See the diagram.

mm

Only to show the distance from the front of the lens; it does not change the DoF. Canon RF: 20 mm flange + lens length from the spec sheet (EF: 44 mm). Zoom lenses get longer as you zoom.

Rezultate

Adâncime de câmp totală
34 cm
Near limit 86 cm
Far limit 120 cm
In front of subject 14 cm
Behind subject 20 cm
Hyperfocal distance 531 cm
Lens to subject (used in formula) 95 cm
Cerc de confuzie 0,030 mm

Model standard de adâncime de câmp pentru obiectiv subțire: H = f²/(N·c) + f. Valorile pot diferi ușor de cele ale obiectivelor reale din cauza difracției, a variației distanței focale la focalizare (focus breathing) și a construcției fiecărui obiectiv.

Lens or sensor mark: where do you measure subject distance from?
Two ways to measure subject distance Side view of a camera, lens and product. The orange dimension runs from the focal-plane mark on the camera body, which marks the sensor, to the subject (S). The black dimension runs from the lens's optical center to the subject (u). The gap between sensor and optical center is v, so S equals u plus v. sensor optical center subject S · from the sensor mark v front of lens u · from the lens

Sensor mark (S). The ⦵ symbol on the top of the camera body marks the sensor plane. Lens specifications measure the minimum focus distance from it, and it is the easiest point to measure from on a PhotoRobot setup with a tape.

Lens (u). Depth of field formulas need the distance from the lens's optical center to the subject. When you pick Sensor mark, the calculator splits S into u + v with the thin-lens equation 1/u + 1/v = 1/f: u = S/2 · (1 + √(1 − 4f/S)). Near and far limits and the hyperfocal distance are then shown from the sensor mark as well.

The difference matters at product distances: a 105 mm lens at f/16 with the sensor mark 918 mm from the subject gives 4.8 cm of depth of field. Entering the same 918 mm as a distance from the lens would show 6.5 cm, about a third too much.

The conversion assumes a thin lens. Real lenses focus internally and their optical center is not exactly where the diagram shows it, so treat results close to the minimum focus distance (macro) as estimates. A thin lens cannot focus closer than 4 × the focal length from the sensor (1:1). If you measured from the front of the lens, add the sensor mark to front of lens length to get S.

Ce este distanța hiperfocală și de ce contează în lucrul de studio?

Distanța hiperfocală (H) este cea mai mică distanță la care se poate focaliza un obiectiv, menținând în același timp obiectele de la infinit acceptabil de clare. Dacă focalizați exact la H, adâncimea de câmp se întinde de la H/2 până la ∞ – procedeul folosit de fotografii de peisaj pentru a păstra clare atât prim-planul, cât și orizontul.

În fotografia de studio și de produs, aceasta este mai ales un indicator: atât timp cât distanța până la subiect este mult mai mică decât H (ceea ce se întâmplă de obicei — H crește cu pătratul distanței focale și scade doar odată cu diafragma), profunzimea de câmp rămâne aproximativ simetrică în jurul subiectului. Când distanța până la subiect se apropie de H, limita îndepărtată ajunge la infinit, iar calculatorul va afișa ∞.

Concluzie practică pentru fotografia de produs și de bijuterii: focalizați pe detaliul cel mai apropiat care trebuie să fie net și folosiți rândurile „Near limit” / „Far limit” de mai sus (sau Tabelul profunzimii de câmp) pentru a verifica dacă restul obiectului se încadrează în profunzimea de câmp.

Resurse suplimentare despre profunzimea de câmp

Pentru resurse suplimentare privind calculul profunzimii de câmp destinate clienților PhotoRobot, consultați manualele de utilizare de mai jos. Veți găsi informații despre profunzimea de câmp în raport cu camerele recomandate de PhotoRobot, despre înțelegerea rezoluției camerei, precum și în contextul iluminatului de studio PhotoRobot.