Tool · 360° spins

PhotoRobot Sharp Zone Planner

Will the whole product stay sharp through a full 360° spin, and how many pixels will it really get? Try it on different types of products: pick one below and it appears in the camera view.

Product size decides the size of the machine and of the whole photo setup. The camera must stand far enough back to fit the spin in the frame, the focal length sets how far that is, the aperture sets how much of the product stays sharp, and every stop you close the aperture needs twice the light. The planner works through that chain for you: change a value and open How it changes the result under it to see why.

Camera View

Fit
The interactive view needs JavaScript and WebGL.

Hiking shoe: PhotoRobot 3D scan at true size, 329 × 147 × 116 mm.

Sharp: real image, no color (between the dark lines)Too near: in front of the sharp zone, softToo far: behind the sharp zone, soft
°
°
mm

Blur at the nearest and farthest point of the product appears here once the interactive view has loaded.

Drag the view left or right to turn the turntable, up or down to raise or lower the camera. On a touch screen swipe sideways, or open full screen to tilt. Double-click or double-tap for 100%, pinch or Ctrl + scroll to zoom. Keys: ← → turn, ↑ ↓ camera height, + − zoom, 0 fit, F full screen.

A simulated frame through your camera at this distance, focal length and aperture. It shows a 3D model of the product; for the hiking shoe, Photos switches to the real photos of our sample spin. Every pixel is blurred by the same thin-lens math as the planner, and dark lines mark the near and far limits of the sharp zone. The sharp zone shows the real image with no color, so you can see that it is sharp; only the soft zones are colored: blue is too near, purple is too far. By default the blur is exaggerated so you see it at a glance; turn that off and zoom to 100% to judge the photo pixel for pixel, the way a deep-zoom viewer shows it.

360° photos and 3D scan by PhotoRobot, from this hiking shoe spin. All model licenses.

One Shot Per Frame Works

At f/40 the whole spin stays sharp at this standard: the depth needs f/38 and diffraction allows up to f/41.3.

Sharp: inside the Focus EnvelopeToo near: in front of the sharp zone, softToo far: behind the sharp zone, soft
Top view: rotation volume 360 mm deep vs Focus Envelope 150 mm at f/16Camera 1,500 mm from the rotation axis (measured from the sensor mark), 105 mm lens, angle of view 18.0° horizontal. Hiking shoe 329 × 147 × 116 mm turned to the worst angle; rotation volume 349 mm across. Focus Envelope from 1,292 to 1,442 mm from the lens, focus 23 mm in front of the axis.Top View (Turntable)mm, true scale1,6001,4001,2001,0008006004002000200200020018.0°1,500 mm along the axis from the sensor mark114 mm sensor mark to lens40020002004002000200Too nearSharpToo far150 mm sharpØ 349329116Angle of view 18.0° horizontal105 mm lens on Canon EOS R5 Mark IIFocus Envelope at f/16: 150 mm1,292 to 1,442 mm from the lensSharp zone at f/16: 150 mm1,292 to 1,442 mm from the lensRotation volume Ø 349 mmOutside the envelope: soft at full resolutionProduct by zone: too near, sharp, too farHiking shoe, turned 71° (worst angle)Focus point 23 mm in front of the axis
Side view, camera 5° up: rotation volume vs Focus Envelope 150 mm at f/16Camera 1,500 mm from the rotation axis (measured from the sensor mark), 105 mm lens, angle of view 12.1° vertical. Hiking shoe 329 × 147 × 116 mm turned to the worst angle; rotation volume 349 mm across. Focus Envelope from 1,292 to 1,442 mm from the lens, focus 23 mm in front of the axis.Side View (Camera 5° Up)mm, true scale1,6001,4001,2001,0008006004002000200-200020040012.1°5° up1,500 mm from the sensor mark3002001000100200-1000100Too nearSharpToo far150 mm sharp360 mm spin depth147Angle of view 12.1° vertical105 mm lens on Canon EOS R5 Mark IIFocus Envelope at f/16: 150 mm1,292 to 1,442 mm from the lensSharp zone at f/16: 150 mm1,292 to 1,442 mm from the lensRotation volume 349 × 147 mmOutside the envelope: soft at full resolutionProduct by zone: too near, sharp, too farHiking shoe, turned 71° (worst angle)Focus point 23 mm in front of the axisLens 114 mm in front of the sensor mark (thin lens)
Top view: a horizontal slice at the height the lens aims at. Side view: the plane of the lens axis. Upper drawing at true scale from the camera to the product, lower drawing enlarged around the rotation volume (the cylinder the product sweeps in a 360° spin). The product is turned to its worst angle; with zones on, green parts of the product are sharp at f/16, blue parts are too near and purple parts too far (soft at full resolution). All sizes in millimeters.
Rotation volume depth
360 mm349 mm across, worst angle 71°
Focus Envelope at f/16
150 mm42% of the needed depth
Angle of view
18.0° × 12.1°field at the axis 439 mm × 293 mm; 19.5° focused at infinity
Magnification
0.082×lens to axis 1.39 m, sensor to axis 1.50 m
Pixels across the spin
6,505 pxpixel pitch 4.4 µm
Sharpness standard (CoC)
30 µm6.8 sensor px, classic (DoF tables, 0.03 mm on full frame)
Depth needs
f/38focus 23 mm in front of the axis
Diffraction ceiling
f/41.3effective f/44.7 at this magnification
Airy disk at f/16
23 µm5.3 px; edge blur 16.4 px
  • OKRotation volume fills 79% of the frame width and 60% of the height.
  • ProblemAt f/16 the Focus Envelope is 150 mm deep; the spin needs 360 mm.
  • OKDiffraction at f/16 stays within the sharpness standard (Airy disk 23 µm = 5.3 px).

Your Options

  • Single shot per frame

    f/40

    Depth is covered and diffraction stays within the standard. 36 frames per spin.

Blur at the edge of the rotation volume vs f-number; lowest total blur at f/40f/2.8f/4f/5.6f/8f/11f/16f/22f/32f/45f/6404812162024blur, sensor pixelssharpness standard 6.8 pxceiling f/41.3sweet spot f/40chosen f/16depth needs f/38defocusdiffractioncombined
Blur at the front and back of the rotation volume. Stopping down shrinks defocus blur but grows diffraction blur; the combined curve has one minimum.
1Camera and lens
How it changes the result

The camera sets the size of the whole frame in pixels and the size of one pixel. A camera with more pixels puts more of them on the same product; a smaller APS-C sensor sees a narrower view from the same spot.

mm
How it changes the result

A longer lens shows the product larger from the same distance, so it gets more pixels, but the sharp zone gets shallower and the camera needs more room. A shorter lens fits the spin from closer and shows the product smaller.

2Distance
mm
How it changes the result

Moving the camera back makes the product smaller in the frame (fewer pixels) and deepens the sharp zone. Moving closer gives more pixels but less depth, so you need a higher f-number or focus stacking. Bigger products need more distance, a bigger turntable and a bigger studio.

°
How it changes the result

Raising the camera shows more of the top and changes how deep the spin looks along the lens axis. From above, the product also takes up more height in the frame.

3Product
How it changes the result

Size and shape set the cylinder the product sweeps in a 360° spin. A bigger product needs a bigger machine, more distance and usually more light; a small one needs a longer lens or a closer camera to fill the frame.

mm
Off-center and frames: how they change the result

A product placed away from the center of the turntable sweeps a wider circle, so it needs more depth of field and more room in the frame.

More frames make the rotation smoother. They do not change sharpness, but they multiply the exposures, especially with focus stacking.

4Sharpness standard

The blur circle used by DoF tables, lens scales and our DoF calculator: 0.03 mm on full frame, 6.8 pixels on the Canon EOS R5 Mark II. Sharp for web images and prints up to about 1,200 px across the full frame.

Which standard should I use?
  • Classic for most online stores: spins shown at a typical web size. The numbers match DoF tables, lens scales and our DoF calculator.
  • Full resolution when shoppers zoom into every frame (deep zoom) or you reuse the images at full size. Expect much higher f-numbers or focus stacking.
  • Delivered size when the output size is fixed, for example 2,000 px across the spin: sharp at that size, softer only when zoomed past it.
5Aperture
f/
How it changes the result

A higher f-number (smaller aperture) deepens the sharp zone but lets in less light: each full stop, for example f/8 to f/11, halves the light, so you need twice the flash power or a longer exposure. Past the diffraction ceiling the whole image gets softer.

6Pixels on the product
How it changes the result

The crop uses the largest outline of the product over the full 360° spin, so nothing gets cut off while it turns. Padding adds a margin on every side: a share of the outline's longer side or a fixed number of pixels.

Pixels on the Product

Full frame of the Canon EOS R5 Mark II: 8,192 × 5,464 px (44.8 MPx)

Product crop

36.9 MPx7,905 × 4,665 px

Enough pixels for typical web and marketplace images. Check the minimum size your sales channels require.

Largest outline of the product over the full 360° spin, plus 10% padding. The product fills 80% of the frame width and 61% of the height.

Not sure which setup gets you enough pixels? Ask a PhotoRobot specialist.

How the Planner Decides

Rotation Volume

In a spin every part of the product passes the front and the back of the turntable. The planner treats the product as the cylinder it sweeps: radius R = √(W² + D²) / 2 plus any off-center offset, height H. Seen by a camera raised by angle θ, that cylinder is 2R·cos θ + H·sin θ deep along the lens axis.

Focus Envelope

The Focus Envelope is the depth band in which defocus blur stays within the sharpness standard. It uses the same thin-lens formula as our depth of field calculator: H = f²/(N·c) + f, near = (H − f)·s / (H + s − 2f), far = (H − f)·s / (H − s). Focus at the harmonic mean 2ab / (a + b) of the volume's front a and back b splits it evenly.

Three Sharpness Standards

The standard sets the circle of confusion c, the largest blur circle on the sensor that still counts as sharp. Classic uses the value of DoF tables, lens scales and our depth of field calculator: 0.03 mm on full frame, about 7 pixels on an EOS R5 Mark II, enough for web images and prints. Full resolution sets c to one sensor pixel (4.39 µm on the R5 Mark II), so every frame holds up at 100% in deep zoom. Delivered size sets it to one pixel of the image you deliver. The f-number that covers the whole volume is N = f²·s·(1/a − 1/b) / (2c·(s − f)), which close up behaves like depth · m² / (2c·(1 + m)): a 7× stricter standard needs a 7× higher f-number.

Diffraction Sets a Ceiling

Stopping down spreads every point into an Airy disk 2.44 · λ · N · (1 + m) wide (λ = 550 nm). Once its radius passes the circle of confusion, a smaller aperture stops adding sharpness: about f/6.5 at full resolution on an R5 Mark II, about f/45 at the classic standard. When the depth needs a higher f-number than that ceiling, no single exposure is sharp at the chosen standard, and the chart shows the best compromise.

Angle of View

The cone in both drawings is what the sensor sees: 2·atan(sensor / 2v), where v = f·(1 + m) is the lens-to-sensor distance at this focus. Focused at infinity it is the catalog value 2·atan(sensor / 2f); close up the view narrows a little.

Camera View

The view renders a 3D model of the product. For the hiking shoe, Photos switches it to the real 360° photos of our sample spin; the distance of every pixel then comes from a 3D scan of the same shoe, matched to each photo. A point at distance z blurs into a circle f²·|z − s| / (N·(s − f)·z) wide on the sensor, exactly the circle the Focus Envelope limits to the standard, combined with diffraction. With the blur exaggerated, everything beyond the standard is drawn twice its full-resolution size; without it, at 100% one screen pixel is one sensor pixel. Drag the view to turn the turntable or raise the camera.

Focus Stacking

Stacking shoots several focus slices at a sharp aperture and merges them. It restores full resolution, but each slice multiplies the exposures per frame, so a 36-frame spin quickly runs to hundreds or thousands of shots.

Pixels on the Product

The camera's full frame has a fixed number of pixels, for example 8,192 × 5,464 on an EOS R5 Mark II. A point at distance Z along the lens axis and X to the side lands v·X / Z from the center of the sensor, the same thin-lens projection the camera view uses. The planner projects the whole rotation volume, so the outline is the largest the product reaches over the full 360° spin and nothing gets cut off while it turns. Add the padding, convert millimeters on the sensor to pixels, and the crop shows how many megapixels the product really gets. A perfectly sharp photo can still be only half a megapixel.

Distance from Sensor or Lens

In the studio you measure from the sensor-plane mark on the camera body; the optics need the distance from the lens. For a thin lens u = s/2 · (1 + √(1 − 4f/s)). Choose which one you entered; the difference matters most at close range.