Hand tools and power tools on a turntable in a concrete studio
Guide in Small hard goods

Small Parts, Bits, and Consumables

Bits, blades, abrasives, filters and spare parts, often tiny and sold in packs.

12subjects
56catalog items
0item entries

What Sets Small Parts, Bits, and Consumables Apart

Bits, blades, abrasives, fasteners, filters, and spare parts are small, often sold in packs, and bought by people who need an exact match. A buyer searching for a drill bit, a sanding disc, or a replacement part wants to read the size, the shank type, the grit, or the thread, and to compare it with what they already have. That makes sharpness, legible markings, and a clear sense of scale more important here than any styling.

The Common Baseline

Preparation

Sort parts by size before the session and handle bright steel with gloves. Wipe off cutting oil and packaging dust, straighten blister packs, and decide whether each product is shown in its pack, out of the pack, or both. For sets in cases, open the case, check that every slot is filled in the right order, and close any empty gaps before shooting.

Light

Hardened steel bits, taps, and extractors have mirror-like flanks; long strip lights or a light tent turn them into clean, even highlights that show the flutes and the cutting edges. Matte abrasives, filters, and rubber parts need a lower side light so grit, weave, and molding read clearly.

Keep the background plain and bright: small parts against a busy or dark background are hard to judge, and their silhouettes are what buyers recognize first.

Shots

Plan a front packshot, a shot of the contents out of the pack, and macro close-ups of the tip, the thread, the grit marking, or the part number, with focus stacking where one frame cannot hold the whole part sharp. Sets in cases need a top-down view with the lid open. A scale reference, such as a ruler in a second image, helps buyers check the size.

How the Groups Differ

The groups differ mostly in size and surface. Bits, taps, and fasteners are tiny and mirror-bright; abrasives and welding consumables are matte or satin; vacuum filters and compressor fittings are larger and closer to ordinary tabletop products.

Across the 12 groups in our data, the typical longest side runs from under 5 cm to 80 cm, and weights from under 0.5 kg to 2 kg. Surfaces by number of groups: satin (4), mixed (3), mirror (3), matte (2).

GroupTypical sizeWeightSurfaceHandlingBest-fit machines
Measuring tool accessories and refillsup to 30 cmup to 0.5 kgmixed, mixedno special handlingCASE 850, C850, CL850
Screwdriver bits and holdersup to 5 cmup to 0.5 kgmirrorno special handlingCASE 850, C850, CL850
Drill bits and drill accessoriesup to 30 cmup to 0.5 kgmirrorno special handlingCASE 850, C850, CL850
Nails, staples and rivets for toolsup to 5 cmup to 2 kgsatinno special handlingCASE 850, C850, CL850
Sanding discs, belts and grinding wheelsup to 30 cmup to 2 kgmatteno special handlingCASE 850, C850, CL850
Taps and diesup to 30 cmup to 0.5 kgmirrorno special handlingCASE 850, C850, CL850
Solder, welding wire and torch tipsup to 30 cmup to 2 kgsatinno special handlingCASE 850, C850, CL850
Hand tool spare partsup to 30 cmup to 2 kgsatinno special handlingCASE 850, C850, CL850
Power tool attachments and spare partsup to 30 cmup to 2 kgmixedno special handlingCASE 850, C850, CL850
Shop vacuum filters, hoses and nozzles5 cm to 80 cmup to 2 kgmatteno special handlingCUBE COMPACT, CASE 850, C850, CL850, CUBE
Air compressor hoses and fittings5 cm to 80 cmup to 2 kgmixedno special handlingCUBE COMPACT, CASE 850, C850, CL850, CUBE
Screw extractors and nut splittersup to 30 cmup to 0.5 kgsatinno special handlingCASE 850, C850, CL850

Which Setup for Which Product

ProductSetupMachines
Screwdriver bits and holders; drill bits and drill accessories; taps and dies; screw extractors and nut splittersMacro lens, light tent or strip lights along the flutes, and focus stacking for tips and threads, on an 850 mm table only.CASE 850, C850, CL850
Nails, staples and rivets for tools; solder, welding wire and torch tipsContents out of the pack in a small heap or a row next to the pack, plus a close-up of the size marking.CASE 850, C850, CL850
Sanding discs, belts and grinding wheels; measuring tool accessories and refills; hand tool spare parts; power tool attachments and spare partsLow side light for grit and molding, a top-down view for discs and flat parts, and the pack beside the product.CASE 850, C850, CL850
Shop vacuum filters, hoses and nozzles; air compressor hoses and fittingsOrdinary tabletop setup: spin or front packshot, plus a close-up of the connector size.CUBE COMPACT, CASE 850, C850, CL850, CUBE

PhotoRobot Machines by Size

PhotoRobot shoots the smallest items here, screwdriver bits and holders; nails, staples and rivets for tools; measuring tool accessories and refills; drill bits and drill accessories; sanding discs, belts and grinding wheels; taps and dies; solder, welding wire and torch tips; hand tool spare parts; power tool attachments and spare parts; screw extractors and nut splitters, on the 850 mm tables; the 1,300 mm glass of the C1300 and CL1300 and the FRAME are meant for larger products.

  • Up to 5 cm (smallest items): Screwdriver bits and holders; nails, staples and rivets for tools. Recommended: CASE 850, C850, and CL850.
  • Up to 30 cm (smallest items): Measuring tool accessories and refills; drill bits and drill accessories; sanding discs, belts and grinding wheels; taps and dies; solder, welding wire and torch tips; hand tool spare parts; power tool attachments and spare parts; screw extractors and nut splitters. Recommended: CASE 850, C850, and CL850.
  • 5 cm to 80 cm: Shop vacuum filters, hoses and nozzles; air compressor hoses and fittings. Recommended: CUBE COMPACT, CASE 850, C850, CL850, and CUBE.

Limits and What to Check

  • Focus stacking takes time per product; plan it for hero images rather than for every variant.
  • Part numbers and sizes printed on the shank are often tiny and shiny; angle the light until they read, or show them on the pack.
  • Very small parts are photographed on the 850 mm tables, never on the 1,300 mm glass or the FRAME, where they would only fill a corner of the plate.

Next Step

Start with the largest product you plan to shoot from this guide, typically shop vacuum filters, hoses and nozzles at 5 cm to 80 cm: enter its size in the Sharp Zone Planner to see whether it stays sharp through a full spin and which camera distance and aperture that needs.

For the light, compare FOMEI Low LED and Broncolor Strobes on the studio lighting page. For high volumes of small parts, FOMEI Low LED keeps the cost low and can shoot non-stop on small items; Broncolor Strobes suit studios that capture long runs, because they keep flashing at a high rate without tiring.

Then send a short list of the small parts, bits and consumables you plan to shoot, with the largest and the heaviest piece, the shots you need, and your monthly volume, to PhotoRobot sales; they confirm the machine and the lighting kit before you order.

Subjects in This Guide

Measuring Tool Accessories and Refills

Size up to 30 cmWeight up to 0.5 kgSurface mixed, mixed

Covers: laser level tripod, tape measure clip, level vial, chalk refill, marking paint, laser target card

Recommended: CASE 850, C850, CL850

How to photograph measuring tool accessories and refills

Screwdriver Bits and Holders

Size up to 5 cmWeight up to 0.5 kgSurface mirror

Covers: bit holder, magnetic bit extension, screwdriver handle, screwdriver bits, driver bits, Torx bits

Recommended: CASE 850, C850, CL850

How to photograph screwdriver bits and holders

Drill Bits and Drill Accessories

Size up to 30 cmWeight up to 0.5 kgSurface mirror

Covers: drill chuck, depth stop, drill guide, chuck key, drill bits, masonry bit

Recommended: CASE 850, C850, CL850

How to photograph drill bits and drill accessories

Nails, Staples, and Rivets for Tools

Size up to 5 cmWeight up to 2 kgSurface satin

Covers: staples, brad nails, rivets, collated nails

Recommended: CASE 850, C850, CL850

How to photograph nails, staples and rivets for tools

Sanding Discs, Belts, and Grinding Wheels

Size up to 30 cmWeight up to 2 kgSurface matte

Covers: sanding discs, sandpaper, grinding wheel, flap disc, replacement rasp blade, shaper blade

Recommended: CASE 850, C850, CL850

How to photograph sanding discs, belts and grinding wheels

Taps and Dies

Size up to 30 cmWeight up to 0.5 kgSurface mirror

Covers: threading die, round die, hex die, threading tap, plug tap, spiral tap

Recommended: CASE 850, C850, CL850

How to photograph taps and dies

Solder, Welding Wire, and Torch Tips

Size up to 30 cmWeight up to 2 kgSurface satin

Covers: solder wire, welding rods, MIG wire, brazing rod, heat gun nozzle set, heat shrink tubing

Recommended: CASE 850, C850, CL850

How to photograph solder, welding wire and torch tips

Hand Tool Spare Parts

Size up to 30 cmWeight up to 2 kgSurface satin

Covers: drywall sander pad, taping knife blade, joint tape, trowel replacement blade, glass cutter wheel, float pad

Recommended: CASE 850, C850, CL850

How to photograph hand tool spare parts

Power Tool Attachments and Spare Parts

Size up to 30 cmWeight up to 2 kgSurface mixed

Covers: demolition chisel bit, breaker point, grinder guard, backing pad, sander dust bag, chisel bits

Recommended: CASE 850, C850, CL850

How to photograph power tool attachments and spare parts

Shop Vacuum Filters, Hoses, and Nozzles

Size 5 cm to 80 cmWeight up to 2 kgSurface matte

Covers: shop vacuum filter, HEPA filter, cartridge filter, vacuum hose, extension wand, hose adapter

Recommended: CASE 850, C850, CL850, CUBE, CUBE COMPACT

How to photograph shop vacuum filters, hoses and nozzles

Air Compressor Hoses and Fittings

Size 5 cm to 80 cmWeight up to 2 kgSurface mixed

Covers: air hose, quick coupler, air regulator, blow gun, compressor oil, air filter element

Recommended: CASE 850, C850, CL850, CUBE, CUBE COMPACT

How to photograph air compressor hoses and fittings

Screw Extractors and Nut Splitters

Size up to 30 cmWeight up to 0.5 kgSurface satin

Covers: screw extractor, stripped screw remover, bolt extractor, nut splitter, nut cracker tool

Recommended: CASE 850, C850, CL850

How to photograph screw extractors and nut splitters