Lamps, bulbs and flashlights on a turntable in a concrete studio
Guide in Electronics and devices

Lamps and Lighting

Bulbs, lamps and light fittings: lit and unlit states, glass shades and glare.

5subjects
23catalog items
22item entries

What Sets Lamps and Lighting Apart

Lamps and lighting are the one product group where the product itself is a light source. Bulbs, lamps, string lights, flashlights, and lampshades have to be shown switched off, so buyers see the shape, the materials, and the fittings, and switched on, so they see the glow, the color of the light, and the pattern it throws. Glass shades and bulbs add transparency and reflections, and fabric shades show every seam when lit from inside.

The Common Baseline

Preparation

Clean glass shades and bulbs with gloves, remove labels, and straighten fabric shades. Use matching bulbs across a range so the lit shots compare fairly, and coil cables neatly or hide them. For string lights and LED strips, plan a layout on the background, such as a loose curve, that shows the length and the spacing of the lights.

Light

Shoot the unlit state first with soft studio light, as for any glossy or mixed-material object. For the lit state, reduce the studio light until the product's own light reads clearly, often with a longer exposure, and keep the camera locked so both states line up exactly.

Clear bulbs and glass shades read best against a backlight with dark side cards; frosted and fabric shades glow evenly when lit from inside, so watch for hot spots where the bulb sits close to the shade.

Shots

Plan lit and unlit states from the same position, a front packshot on white, a 360-degree spin for lamps with interesting forms, close-ups of switches, sockets, and fittings, and an in-use or context shot that shows the light in a room. Bulbs need a backlit shot that shows the filament or the LED structure.

How the Groups Differ

The groups differ in size and in how they emit light: bulbs and flashlights are small and point-like, string lights spread their light along a cable, and floor and pendant lamps are large enough to need a turning platform in our data.

Across the 5 groups in our data, the typical longest side runs from under 5 cm to 1.5 m, and weights from under 0.5 kg to 40 kg. Surfaces by number of groups: mixed (3), gloss (2). The handling notes that recur most are fragile (3 of 5) and cord or battery (3 of 5).

GroupTypical sizeWeightSurfaceHandlingBest-fit machines
Light bulbs and tubesup to 30 cmup to 0.5 kggloss, transparentfragileCASE 850, C850, CL850
Lamps and light fixtures5 cm to 1.5 m0.5 kg to 40 kgmixed, mixedfragile, cord or battery, many partsCUBE COMPACT, CL850, CUBE
String lights and LED strips5 cm to 30 cmup to 2 kggloss, translucentlies flat, cord or batteryCASE 850, C850, CL850
Flashlights and lanternsup to 80 cmup to 2 kgmixedcord or batteryCUBE COMPACT, CASE 850, C850, CL850, CUBE
Lampshades, bases and lighting parts5 cm to 80 cmup to 2 kgmixed, mixedfragileCUBE COMPACT, CASE 850, C850, CL850, CUBE

Which Setup for Which Product

ProductSetupMachines
Light bulbs and tubesBacklight with dark side cards for clear glass, lit and unlit states, and a close-up of the base and the filament.CASE 850, C850, CL850
Lamps and light fixturesTurning platform or a large plate for floor lamps, a locked camera, an unlit spin first, then lit frames with reduced studio light.CUBE COMPACT, CL850, CUBE
String lights and LED stripsTop-down layout on a dark or neutral background, lit and unlit states, and a close-up of one light and the plug.CASE 850, C850, CL850
Flashlights and lanterns; lampshades, bases and lighting partsTabletop spin with close-ups of switches and sockets; lampshades lit from inside to show seams and fabric.CUBE COMPACT, CASE 850, C850, CL850, CUBE

PhotoRobot Machines by Size

Limits and What to Check

  • Mixed light from the product and the studio can shift colors; set white balance for the studio and keep the product's own light as warm or as cool as it really is.
  • Lit shades can show hot spots that the eye ignores; check them at full size.
  • Floor lamps and tall fixtures may be too tall for a tabletop spin; our data recommends the Turning Platform for them.

Next Step

Start with the largest product you plan to shoot from this guide, typically lamps and light fixtures at 5 cm to 1.5 m: enter its size in the Sharp Zone Planner to see whether it stays sharp through a full spin and which camera distance and aperture that needs.

For the light, compare FOMEI High LED and FOMEI LED Roll Panels on the studio lighting page. Continuous FOMEI High LED light lets you see how the studio light and the product's own light mix while you set up, and the LED Roll Panels give an even backlight for clear bulbs and shades.

Then send a short list of the lamps and lighting you plan to shoot, with the largest and the heaviest piece, the shots you need, and your monthly volume, to PhotoRobot sales; they confirm the machine and the lighting kit before you order.

Subjects in This Guide

Light Bulbs and Tubes

Size up to 30 cmWeight up to 0.5 kgSurface gloss, transparent
  • LED bulb

Recommended: CASE 850, C850, CL850

How to photograph light bulbs and tubes

Lamps and Light Fixtures

Size 5 cm to 1.5 mWeight 0.5 kg to 40 kgSurface mixed, mixed
  • Fiber optic lamp
  • Floor lamp
  • Work light
  • Novelty lamp
  • Recessed downlight
  • Wall sconce
  • Pendant light
  • Plug-in night light
  • +1 more

Recommended: CL850, CUBE, CUBE COMPACT

How to photograph lamps and light fixtures

String Lights and LED Strips

Size 5 cm to 30 cmWeight up to 2 kgSurface gloss, translucent
  • String lights
  • LED strip light

Recommended: CASE 850, C850, CL850

How to photograph string lights and led strips

Flashlights and Lanterns

Size up to 80 cmWeight up to 2 kgSurface mixed
  • Oil lantern
  • Flashlight

Recommended: CASE 850, C850, CL850, CUBE, CUBE COMPACT

How to photograph flashlights and lanterns

Lampshades, Bases, and Lighting Parts

Size 5 cm to 80 cmWeight up to 2 kgSurface mixed, mixed
  • Lamp parts
  • Lamp ballast
  • Lamp socket
  • Dimmer switch
  • Lampshade
  • Lamp base
  • Lamp bracket
  • Bulb changer
  • +1 more

Recommended: CASE 850, C850, CL850, CUBE, CUBE COMPACT

How to photograph lampshades, bases and lighting parts