PhotoRobot C850 - Light Setup
This manual shows where the studio lights of the C850 turntable go and how to angle them: four lights for the turntable alone, five lights when the turntable works with the Robotic Arm. Assembly of the machine itself is described in the C850 & C1300 User Guide. The C1300 is larger and has its own light distances: see the C1300 Light Setup.
1 The Four Lights at a Glance
| # | Light | Modifier | Stand | Position and angle |
|---|---|---|---|---|
| 1 | Product left light | softbox 60 x 85 cm, vertical | LS-13B | front left; softbox tilted about 45 deg |
| 2 | Background top light | softbox 90 x 120 cm, horizontal | LS-13B | behind the background; shines directly onto the background, softbox at 0 deg |
| 3 | Background bottom light | softbox 90 x 120 cm, horizontal | LS-3B | below the background; tilted about 45 deg |
| 4 | Product right light | softbox 60 x 85 cm, vertical | LS-13B | as light 1, mirrored |
2 Positions on the C850
Positions in mm, measured from the C850 production drawing (approximate, about ±100 mm). X runs from the center axis (+ to the right), Y from the plate center (+ toward the camera). Light heights are not specified in the source: set them on site.
| # | Light | X | Y | Height | Aim / tilt |
|---|---|---|---|---|---|
| 1 | Product left | ≈ −700 | ≈ +750 | set on site | tilt 45 deg |
| 2 | Background top | 0 | ≈ −1 150 | set on site | 0 deg |
| 3 | Background bottom | 0 | ≈ −600 | set on site | tilt 45 deg to the background |
| 4 | Product right | ≈ +700 | ≈ +750 | set on site | tilt 45 deg |
| 5 | Lower front (with the Robotic Arm) | 0 | ≈ +560 | set on site | tilt 45 deg |
| BG | Built-in background | – | ≈ −470 | – | lit from behind and below |
3 Background Lights (2 and 3)
- Mount the background top light with the 90 x 120 cm softbox in a horizontal position on an LS-13B stand. It shines directly onto the background (softbox at 0 deg).
- Mount the background bottom light with the 90 x 120 cm softbox in a horizontal position on an LS-3B stand and place it below the background, tilted about 45 deg.
4 Product Lights (1 and 4)
- The left and right lights have 60 x 85 cm softboxes in a vertical position.
- Mount them on LS-13B stands, front left and front right.
- Tilt each softbox about 45 deg.
5 With the Robotic Arm: Five Lights
With the Robotic Arm the background lights (2, 3) and the product lights (1, 4) stay as above. A fifth light is added:
| # | Light | Modifier | Stand | Position and angle |
|---|---|---|---|---|
| 5 | Lower front light | softbox 40 x 120 cm, horizontal | LS-3B | in the front section, below the background; tilted about 45 deg |
Mount the lower front light with the 40 x 120 cm softbox in a horizontal position on an LS-3B stand, in the front section below the background, tilted about 45 deg.
6 Light Control
Light control: Broncolor Lights Management or the FOMEI manuals, depending on the light set.
PhotoRobot Academy
Learn It in the PhotoRobot Academy
This manual is the reference. The Academy teaches the topic step by step, with exercises and a certificate.
Full curriculum outline