Save time and summarize this page’s content
Choose your tool to generate a summary of this page:

PhotoRobot Turning Platform 100 cm - Light Setup

This manual shows where the five studio lights of the 100 cm Turning Platform go and how to angle them, with and without the Robotic Arm. Installation of the platform itself is described in the Turning Platform User Guide.

Before you start

  • During assembly, make sure the arm has a full range of motion between 0 deg and 90 deg.

1 The Five Lights at a Glance

# Light Modifier Stand Position and angle
1 Product top light softbox 90 x 120 cm, vertical LS-13B with wall boom clamp behind the camera, as close as possible to the turntable; tilted about 45 deg
2 Product left light softbox 90 x 120 cm, vertical LS-13B front left; tilted about 45 deg toward the platform
3 Product right light softbox 90 x 120 cm, vertical LS-13B front right; tilted about 45 deg toward the platform
4 Background left light strip softbox 30 x 180 cm, vertical LS-13B shines directly toward the middle of the background
5 Background right light strip softbox 30 x 180 cm, vertical LS-13B shines directly toward the middle of the background

The plan shows the platform (diameter 1,000 mm), the background 400 mm behind the platform edge, and the two centering lasers: laser 1 on an LS40 stand at the right side, laser 2 on an LS-13B stand behind the background.

Turning Platform 100 cm light plan: five lights with type, stand and tilt at each light, plus a setup table of positions and heights.
01 Product top · 02 Product left · 03 Product right · 04 Background left · 05 Background right

2 Front Top Light (1)

The top product light with a 90 x 120 cm softbox in a vertical position is mounted on an LS-13B stand with a wall boom clamp, behind the camera, as close as possible to the turntable, with a light tilt of about 45 deg. During assembly, make sure the arm has a full range of motion between 0 deg and 90 deg.

3 Front Left and Right Lights (2 and 3)

The front left and right lights have 90 x 120 cm softboxes in a vertical position and are mounted on LS-13B stands at a tilt of about 45 deg toward the platform.

4 Background Left and Right Lights (4 and 5)

The background left and right lights have 30 x 180 cm strip softboxes in a vertical position, are mounted on LS-13B stands and shine directly toward the middle of the background.

5 With the Robotic Arm

With the Robotic Arm the five lights are the same and are set up the same way. The camera is on the arm; keep the full range of motion of the arm between 0 deg and 90 deg free.

Turning Platform 100 cm with Robotic Arm light plan: five lights with type, stand and tilt at each light, plus a setup table of positions and heights.
01 Product top · 02 Product left · 03 Product right · 04 Background left · 05 Background right

6 Equipment

Qty Item
5 lights
3 90 x 120 cm RECTA Exclusive softbox, with speed ring and adapter
2 30 x 180 cm STRIP BOX Exclusive softbox, with speed ring and adapter
9 (with the Robotic Arm: 7) Master LS-13B stand, max. 380 cm, 4 sections
1 wall boom set (counterweight + clamp)
1 wall boom pole with 2 m pin

7 Light Control

Light control: Broncolor Lights Management or the FOMEI manuals, depending on the light set.

PhotoRobot Academy

Learn It in the PhotoRobot Academy

This manual is the reference. The Academy teaches the topic step by step, with exercises and a certificate.

Full curriculum outline