Save time and summarize this page’s content
Choose your tool to generate a summary of this page:
PhotoRobot CASE 850 - Light Setup
This manual shows where the four studio lights of the CASE 850 (basic version) go and how to angle them. Using the machine itself is described in the CASE 850 User Guide.
1 The Four Lights at a Glance
| # | Light | Modifier | Stand | Position and angle |
|---|---|---|---|---|
| 1 | Product left light | softbox 60 x 85 cm, vertical | LS-13B | front left; softbox tilted about 45 deg |
| 2 | Background top light | softbox 60 x 85 cm, horizontal | LS-13B | behind the background; shines directly onto the background, softbox at -10 deg |
| 3 | Background bottom light | softbox 60 x 85 cm, horizontal | LS-3B | below the background; tilted about 45 deg |
| 4 | Product right light | softbox 60 x 85 cm, vertical | LS-13B | as light 1, mirrored |
2 Background Lights (2 and 3)
- Mount the background top light with the 60 x 85 cm softbox in a horizontal position on an LS-13B stand. It shines directly onto the background.
- Mount the background bottom light with the 60 x 85 cm softbox in a horizontal position on an LS-3B stand and place it below the background, tilted about 45 deg.
3 Product Lights (1 and 4)
- The left and right lights have 60 x 85 cm softboxes in a vertical position.
- Mount them on LS-13B stands, front left and front right.
- Tilt each softbox about 45 deg.
4 Light Control
Light control: Broncolor Lights Management or the FOMEI manuals, depending on the light set.
PhotoRobot Academy
Learn It in the PhotoRobot Academy
This manual is the reference. The Academy teaches the topic step by step, with exercises and a certificate.
Full curriculum outline