Shutter release cable

Also known as shutter cable, remote shutter release, wire shutter. Category: Hardware

A shutter release cable connects a camera's remote port to an external trigger so the shutter can be fired without touching the camera. In automated photography the trigger is the robot's controller, which fires the camera at exactly the right angle.

How PhotoRobot uses it

PhotoRobot control units fire cameras through their digital outputs; a dual output can, for example, pre-raise the mirror of an SLR with one signal and expose with the other. PhotoRobot prepares a shutter cable with a camera-specific connector, which is why it asks customers to confirm their camera model. Third-party cameras are supported when fired by cable from the control unit.

See on photorobot.com

  • Control unit: The computer inside or beside every PhotoRobot that drives its motors, triggers cameras and connects it to the network.
  • Fast Spin: PhotoRobot capture mode that photographs during continuous turntable rotation instead of stopping at each angle.
  • Tethered shooting: Shooting with the camera connected to a computer, which controls settings and receives every image directly.
  • Shutter lag: The delay between triggering a camera and the moment the image is actually exposed.

Where this term appears on photorobot.com

Mentioned on 13 pages of photorobot.com:

  1. PhotoRobot SynchroBox - Functionality & Setup User Guide (Manual)
    c) The Control Unit fires the camera shutter via shutter cable in advance.
  2. PhotoRobot MultiCam and Centerless Table Installation Guide (Manual)
    1 x motor cable 5m, connected from the SwitchBox left connector and fastened to the portal connector 1 x shutter cable extension 5m connected from the CUG6 OUT port to the SynchroBox IN port (the…
  3. PhotoRobot Cube V5 / V6 / Compact User Manual (Manual)
    Then, prepare the following cables: the power cable (1-meter length), shutter cable, motor cable, and the ethernet cable (2-meter length).
  4. PhotoRobot CASE 850 Portable Studio User Guide (Manual)
    Synchronization of the camera shutter and the sequence stops can be controlled by plugging the cable trigger into the CASE.
  5. PhotoRobot Frame Turntable Assembly & User Guide (Manual)
    These support a shutter cable with a coupler, and a laser power cable.
  6. Recommended Cameras for PhotoRobot Systems (Manual)
    Capturing images is then controlled via the robot using a remote shutter release cable.
  7. Setting up a PhotoRobot Workspace - Support Manual (Manual)
    To activate Fast-shot mode, connect any robots with a camera via a shutter cable.
  8. Automated iPhone Product Photography (Software)
    Produce simple 360 spins with camera triggering via wire-shutter and special adaptor technology for remote camera control in sync with PhotoRobot.
  9. PhotoRobot Touch - iPhone App User Manual (Manual)
    In PhotoRobot Touch Spin mode, camera shutter control is via wire-shutter, and the iPhone functions as a remote camera to automate spin photography.
  10. Introducing the PhotoRobot Touch iOS Mobile Application (Blog)
    It is also possible to create simple 360 product spins by iPhone using a wire-shutter and special adaptor to trigger the camera.
  11. About PhotoRobot - Company History & Documentation (Manual)
    3rd party camera synchronization (2004 - Present): Syncvia wire shutter, 3rd party software, and watched folder for data exchange Canon DSLR & mirrorless (2008 - Present) Nikon (2004 - 2024 March):…
  12. Compatible Cameras with PhotoRobot - Support Manual (Manual)
    We also support third-party cameras under the following conditions: The camera is fired using a cable trigger connected to the PhotoRobot Control Unit.
  13. PhotoRobot C850 & C1300 Turntable User Guide (Manual)
    If preparing to use fast spin mode, connect the shutter cable (delivered optionally with the robot) to the camera on one side, and to the OUT port of the C-Class robot on the other side.

Browse the full glossary A–Z